Hardware confirmed from a photo of the bench: the device is a Pluto+
(2RX/2TX, Gigabit Ethernet), not the stock ADALM-PLUTO, plus an RTL-SDR
dongle and several antennas. No attenuator on hand.
- record the actual inventory and the Pluto+ differences that matter:
Ethernet transport, two channels, adi.Pluto first with adi.ad9361 as
the only permitted fallback
- replace "use an attenuator" with numbers: TX puts out about +7 dBm at
0 dB, the RX damage threshold is about +2.5 dBm, so give a staged gain
procedure starting at -60 dB and capped at -30 dB until an attenuator
arrives
- require the antennas to be physically removed from the bench rather
than merely left unplugged
- add the environment blocker found on inspection: the interpreter on
PATH is a standalone Python 3.13.1 without pyadi-iio, libiio or scipy,
while Lab024a clearly ran somewhere else; identifying and recording
that environment is now the first task
- renumber sections and align the TX gain figure with the safety section
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
923e6bec78