43 lines
1.6 KiB
Markdown
43 lines
1.6 KiB
Markdown
This file is the authoritative current task for the main PC TX node.
|
|
Read TX_NODE_STATE.md first. If chat history, this file, the shared spec, and current Git HEAD conflict, stop and report the conflict.
|
|
|
|
# Current TX task
|
|
|
|
TASK =
|
|
WAIT FOR RF-001A SLAVE CLKIN VERIFICATION
|
|
|
|
MASTER SERIAL =
|
|
000000000000000097c063dc323b97d3
|
|
|
|
MASTER CLKOUT COMMAND =
|
|
PASS
|
|
|
|
The official source-side command completed with exit code 0:
|
|
|
|
```powershell
|
|
hackrf_clock.exe -d 000000000000000097c063dc323b97d3 -o 1
|
|
```
|
|
|
|
The earlier `hackrf_clock -r 3` output and register 29 are diagnostic information only. They do not prove whether the physical MASTER output reaches SLAVE. Do not use them as blocking criteria for common-clock verification.
|
|
|
|
The common clock remains unverified until RX laptop task `VERIFY RF-001A SLAVE CLKIN` reports the exact `CLKIN status: clock signal detected` line both before and after its finite 65536-sample RX-start. Only then may the combined result be recorded as `COMMON CLOCK VERIFIED = YES`.
|
|
|
|
The physical checkpoint reported by the user is: both antennas connected, both SDR USB links connected, MASTER CLKOUT connected by coaxial cable to SLAVE CLKIN, about 2 m LOS, and equal antenna polarization.
|
|
|
|
Do not repeat RF-001A transmission preparation or start RF TX in this task. Do not change PLL, sample clock, other clock outputs, registers, firmware, CPLD, Zadig or USB drivers.
|
|
|
|
TASK =
|
|
WAIT FOR RF-001A SLAVE CLKIN VERIFICATION
|
|
BRANCH =
|
|
HEAD =
|
|
MASTER SERIAL =
|
|
MASTER CLKOUT COMMAND =
|
|
RX COMMON CLOCK REPORT =
|
|
COMMON CLOCK VERIFIED =
|
|
YES / NO
|
|
TX READY FOR RF-001A =
|
|
YES / NO
|
|
RF TX =
|
|
0
|
|
STOP.
|